氟素脱模剂【SP-72】

简介：

SP-72氟素脱模喷剂是一种无硅干膜喷剂，令脱膜操作快捷、有效及清洁。无论模具如何复杂，纹路如何细致，仍能可靠地复制模型轮廓。本产品适用于所有塑料和橡胶模具，包括注塑、压缩及吹塑成型工序。

本产品能均匀地渗透到最复杂模具的各个部分，给予完全而清洁的脱模作用。其干性薄膜不会影响制成品轮廓或妨碍精密接合。施涂薄膜粘附能力佳，不会污染或转移到制成品上，安全可靠，不怕产生瑕疵，亦不会对随后的抛光工序构成不良影响。

Description:

SP-72 PTFE MOULD RELEASE AGENT is designed to give fast, efficient and clean release with faithful reproduction of the mould profile however complex the mould or minute the detail. Suitable for use on all plastic and rubber mould tools including injection, compression and blow mouldings. 

Penetrates and spreads to all parts of the most intricate moulds to give full, clean release whilst the dry film will not affect profiles or interfere with precision fits. Applied film has excellent adhesion, is non-staining, will not transfer to product and can be safely used without fear of blemish or any adverse effect on subsequent finishing operations. 

注意事项：

使用前先摇匀，罐身垂直，喷嘴距离模具约20厘米处喷射即可，涂布一次已足够产生功效。压力容器避免阳光直接照射，存放在温度低於50°C的地方。

切勿将容器戳穿或焚烧。

不应喷向火焰或白炽的金属表面。

易燃物品。 

Precautions:

*Shake well, hold upright and spray from a distance of approximately 20cm. One pass usually provides sufficient coating. Pressurised container, protect from sunlight, store at temperature below 50℃

*Do not puncture or incinerate

*Do not spray on to naked flame

*flammable

特性及优点：

*塑料和橡胶成型部件有效的脱膜 

*超薄膜-不会影响制成品轮廓或妨碍精密接合 

*不会影响随后的抛光工序 

*不含硅。

Features & Benefits:

*Effective release of plastics and rubber moulded parts. 

*Thin film - will not affect profiles or interfere with precision fits. 

*Will not affect subsequent finishing operations 

*Silicone free.